LXH Series
When you need complex machine control in the palm of one hand, look no further than the LXH Series. The LXH transmitter was designed with the industrial crane market in mind yet is well suited for most mobile machine control applications. Configurable keypad engraving and custom receiver programming allows the LXH to control up to 22 separate machine operations. Two-step buttons with haptic feedback is also available on this model. The LXH is available in 900 MHz or 2.4 GHz and pairs easily with the LXR Series receiver using our innovative Quick-Link Technology. Simply wave the LXH across the LXR to pair them and you are ready for work. At the end of your shift just dock the LXH to the LXR using the magnetic feet for quick, efficient charging. A state of the art, sunlight readable display screen rounds out the LXH's top features. This customizable display provides operators with: J1939 engine information, charge/power status, link status, and system fault codes.
Contact us today for pricing and availability.
Quick Specs
- Up to 22 functions
- Frequency Range: ISM 902 – 928 MHz; 2400 – 2483.5MHz
- Ingress Protection: IP67
- Sun Readable Display Provides Operator Feedback for System Status/Faults
- Operating Range: 2.4 GHz 600′ : 900 MHz 1500′
- Operating Voltage: 3.3 to 12 VDC (3 × AA Alkaline Batteries; 4.8 VDC Typical)
- Operating Temp: –40°– 176°F
- Weight: ¾ LBS.
Applications
- Crane Control
- Construction Equipment
- Boom Trucks
Options
- 2-Step Buttons with Haptic Feedback
- Magnetic Charging Station*
- LOR Quick Link Technology*
- Customizable Keypad
- Twist-to-Reset E-Stop
- Tethering
* LXR Receiver Required.
| Receiver Options | |
|---|---|
| LXR Receiver | CAN Communication Only |
| LXM Receiver | 12 High Side Outputs, 6 Low Side Outputs, J1939 Communication |
| LXG Receiver | CAN Communication Only |
| General Specifications (900 MHz) | |
|---|---|
| Frequency Range | ISM 902MHz–928MHz |
| Frequency Control | 7 Frequency hopping channels ( Software Selectable ) |
| Modulation | DSSS ( Direct Sequence Spread Spectrum) |
| Error Correction | Automatic Error Detection and Automatic Retransmission |
| Operating Temperature | -40°C to 85°C (-40°F to 185°F) |
| Humidity | Up to 90% RH, non-condensing |
| Operating Range | Approx. 1,500Ft. ** (Line of Sight) |
| General Specifications ( 2.4GHz ) | |
|---|---|
| Frequency Range | 2403.328MHz - 2480.128MHz ( ARIB STD-T66 ) 2473.984 - 2493.440MHz (RCR STD-33) |
| Frequency Control | 42 Frequency hopping channels ( Software Selectable ) |
| Modulation | MSK |
| Security | Channelization, System ID, and Vendor ID |
| Operating Temperature | -40°C to 85°C (-40°F to 185°F) |
| Humidity | Up to 90% RH, non-condensing |
| Operating Range | Approx. 1200Ft. ** (Line of Sight) |
| Transmitter Specifications | |
|---|---|
| Supply Voltage | 9 VDC Min.; 32 VDC Max |
| Max. Current Consumption | less than 180 mA (RF Active); less than 10 mA (Idle Mode) |
| Digital Inputs | 10 x 2 step push buttons with Haptic Feedback |
| 2 x Single step push buttons | |
| E-Stop Input | |
| Analog Inputs | 8 Available - 0-5 VDC (configurable as Digital Inputs) |
| LED Outputs | 2 (RF and Error) |
| CAN Connection | J1939 (2-wire) |
| Power Saving Features | RF Emissions Off Delay less than 1s; Sleep Mode after 3 min (less than 1 mA) |
| Antenna | Internal* |
| Dimensions | Approx. 8.75″ x 4.5″ x 4.5″ |
| Weight | Approx. 2 Lbs. |
| Enclosure | IP67 |
* Internal is standard but external antenna is available upon request
** Operating range is based on the use of an internal antenna; an external antenna may increase the range significantly depending on the application
| Attachment | Size |
|---|---|
 LXH Series Spec Sheet | 224.85 KB |